2. Preparation
22
For assistance, please visit http://www.panasonic.com/consumersupport
2.6 Adjusting volume
Before adjusting volume, set the operation mode
to the fax mode (page 26) or the copy mode
(page 43).
Ringer volume
While the unit is idle, press {V} or {^}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {V} repeatedly to display “RINGER
OFF= OK?”.
2. Press {SET}.
L When a call is received, the unit will not
ring and will display “INCOMING CALL”.
L To turn the ringer back ON, press {^}.
Ringer pattern
L You can select one of three ringer patterns
(feature #161 on page 61).
Monitor volume
While using the monitor, press {V} or {^}.
Initial Programming
2.7 Date and time
You must set the date and time.
1 Press {MENU}.
SYSTEM SETUP
PRESS [()]
2 Press {#}, then {1}{0}{1}.
SETDATE&TIME
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
M:|01/D:01/Y:05
TIME: 12:00AM
4 Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
M:08/D:10/Y:05
TIME: |12:00AM
5 Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 10:15PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:|08/D:10/Y:05
TIME: 10:15AM
2. Press {*} repeatedly to display “PM”.
M:|08/D:10/Y:05
TIME: 10:15PM
6 Press {SET}.
SETUP ITEM [ ]
7 Press {MENU} to exit.
Note:
L The other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
{SET} {V}{^}
{SET}{<}{>}
{MENU}
{FAX}
FLB851-PFQX2175YA-en.book Page 22 Thursday, September 8, 2005 2:24 PM