Filter
Top Products
8. Programmable Features
61
8.3 Basic features
{#}{1}{0}{0} Setting the quick setup
QUICK SETUP
PRESS SET
You can print out the quick fax setup guide and
select the desired receiving mode depending on
your situation.
{1} “FAX ONLY” (default): Use only as a fax
(page 34).
{2} “DIST. RING”: With the Distinctive Ring
service (page 41).
{3} “EXT. TAM”: With an external telephone
answering machine (page 35).
{4} “TEL ONLY”: Mostly phone calls (page 34).
1. Press {MENU}.
2. Press {#}, then {1}{0}{0}.
3. Press {SET}.
4. Press {SET} again to print the quick fax
setup guide.
L If you do not wish to print it, press
{STOP}.
5. Press {1} to {4} to display the desired
setting.
6. Press {SET}.
7. Press {MENU}.
{#}{1}{0}{1} Setting the date and time
SET DATE & TIME
PRESS SET
Enter the date and time using the dial keypad.
See page 22 for details.
{#}{1}{0}{2} Setting your logo
YOUR LOGO
PRESS SET
Enter your logo using the dial keypad. See page
23 for details.
{#}{1}{0}{3} Setting your fax number
YOUR FAX NO.
PRESS SET
Enter your fax number using the dial keypad.
See page 25 for details.
{#}{1}{2}{0} Setting the dialing mode
DIALING MODE
=TONE [V^]
{1} “PULSE”
{2} “TONE” (default)
See page 20 for details.
{#}{1}{2}{1} Setting flash time
SET FLASH TIME
=700ms [V^]
The flash time depends on your telephone
exchange or host PBX.
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “110ms”
{7} “100ms”
{8} “90ms”
Note:
L If the unit is connected via a PBX, PBX
functions (transferring a call, etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
{#}{1}{4}{5} Changing the LCD display
contrast
LCD CONTRAST
=NORMAL [V^]
{1} “NORMAL” (default): For normal contrast.
{2} “DARKER”: Used when the display contrast
is too light.
{#}{1}{6}{1} Setting the ringer pattern
RINGER PATTERN
=A [V^]
{1} “A” (default)
{2} “B”
{3} “C”
{#}{2}{1}{0} Changing the ring setting in
FAX ONLY mode
FAX RING COUNT
RINGS=3 [V^]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
{1} “1”
{2} “2”
{3} “3” (default)
{4} “4”
{5} “5 EXT.TAM” (External Telephone
Answering Machine)
{#}{2}{1}{6} Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [V^]
FLB851-PFQX2175YA-en.book Page 61 Thursday, September 8, 2005 2:24 PM