Filter
Top Products
2. Preparation
27
For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
2.11 Date and time
1 Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[()]
2 Press {<} or {>} repeatedly to display the
following.
SET DATE & TIME
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
M:|01/D:01/Y:03
TIME: 12:00AM
4 Enter the current month/day/year by
selecting 2 digits for each.
Example: August 10, 2003
Press {0}{8} {1}{0} {0}{3}.
M:08/D:10/Y:03
TIME: |12:00AM
5 Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:|08/D:10/Y:03
TIME: 10:15AM
2. Press {*} repeatedly to display “PM”.
M:|08/D:10/Y:03
TIME: 10:15PM
6 Press {SET}.
L The next feature will be displayed.
7 Press {MENU} to exit the program.
Note:
L The date and time will be printed on each
page transmitted from your unit.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
If you have registered with openLCR
service
The date and time will be automatically set.
{SET}
{<}{>}
{MENU}
FPG376.book Page 27 Wednesday, July 30, 2003 6:28 PM