Filter
Top Products
3. Telephone
31
3.1.2 Using the base unit
1 Press {DIGITAL SP-PHONE}.
2 Dial the telephone number.
L When the other party answers, talk into
the microphone.
3 When finished talking, press {DIGITAL SP-
PHONE}.
Note:
L To switch to the handset while using the base
unit speakerphone:
– If the handset is off the base unit, press
{TALK} or {SP-PHONE}.
– If on the base unit, just lift up.
To redial the last number dialed from the
base unit
Press {DIGITAL SP-PHONE}, then press
{REDIAL/PAUSE}.
3.2 Answering phone calls
3.2.1 Using the handset
1 Lift the handset and press {TALK}.
L You can also answer a call by pressing
any dialing button {0} to {9}, {*}, or {#}
(Any key talk feature).
2 When finished talking, press {OFF} or place
the handset on the base unit.
Answering phone calls hands-free
1. Lift the handset and press {SP-PHONE},
and talk into the microphone.
2. When finished talking, press {OFF} or place
the handset on the base unit.
Auto talk feature (Handset)
This feature allows you to answer a call by simply
lifting the handset off the base unit, without
pressing {TALK} or {SP-PHONE}. The default
setting is OFF. To activate this feature, proceed
as follows.
Make sure the handset is idle.
1. Press {FUNCTION}.
2. Scroll to “Program” by pressing {v} or {e}
repeatedly, and press {>}.
3. Press {>} at “Talk switching”.
4. Press {v} or {e} repeatedly to select “On”
and press {>}.
5. Press {OFF}.
Note:
L If you subscribe to Caller ID service, and
want to view the caller’s information on the
handset display before answering a call, turn
OFF this feature.
Speakerphone operation
L Use the speaker in a quiet room.
L Adjust the base unit speaker volume using
{A} or {B}.
{REDIAL/PAUSE}{A}{B}
{DIGITAL SP-PHONE}
Microphone
{TALK}
{SP-PHONE}
{FUNCTION}
{OFF}
{>}{e}{v}
Microphone
FPG376.book Page 31 Wednesday, July 30, 2003 6:28 PM