Filter
Top Products
8. Programmable Features
62
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 40).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select “ON”.
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or
“PM”.
10.Press {SET}.
11.Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [±]
“ON”: The Caller ID list will be printed
automatically each time the unit logs 30 calls
(page 36).
“OFF” (default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 30 calls.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF [±]
See page 47 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D [±]
See page 48 for details.
Code #34: Setting the quick scan
QUICK SCAN
MODE=OFF [±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
“ON”: The unit will scan the document and store it
into memory first, then the unit will start sending
or copying.
“OFF” (default): Deactivates this feature.
Note:
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
MODE=92% [±]
If the size of the document sent by the other
party is as large as or larger than the recording
paper, the unit can reduce the document and
print it. Select the desired reduction rate.
Code #39: Changing the display contrast
LCD CONTRAST
MODE=NORMAL [±]
“NORMAL” (default): For normal contrast.
“DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
MODE=ON [±]
If you use an extension telephone and wish to
use it to receive a fax, activate this feature and
program the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select “ON”.
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9,
{*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
Setting Recording
paper size
Original
document
size
100% Legal Letter, A4
A4 Letter
92%
(default)
Letter Letter
Legal Legal
A4 A4
86% Letter A4
72% Letter Legal
A4 Legal
FPG376.book Page 62 Wednesday, July 30, 2003 6:28 PM