Filter
Top Products
3. Telephone
39
3.11 Erasing caller
information
You can erase all or specific caller information.
Once erased, it cannot be accessed from either
the handset or the base unit.
L Keep the front cover page open for button
locations.
3.11.1 Erasing all caller
information
Using the handset
1 Press {v} or {e}.
2 Press {CLEAR}.
3 Scroll to “All clear” by pressing {v} or
{e} repeatedly.
L To cancel erasing, press {OFF}.
4 Press {>} or {CLEAR}.
Using the base unit
1 Press {MENU} repeatedly to display
“CALLER SETUP”.
2 Press {SET}.
3 Press {SET} again.
L To cancel erasing, press {STOP}, then
{MENU}.
4 Press {SET}.
5 Press {STOP}.
3.11.2 Erasing specific caller
information
Using the handset
1 Press {v} or {e} repeatedly to display the
desired item.
2 Press {CLEAR}.
L To erase other items, repeat from step 1.
3 Press {OFF}.
Using the base unit
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {ERASE}.
L To erase other items, repeat steps 2 and
3.
4 Press {STOP}.
3.12 Storing caller
information into the
navigator directory
Important:
L This feature is not available in the
following cases.
– The telephone number includes data
other than numbers (i.e., * or #).
– The caller information does not
include a telephone number.
3.12.1 Into the handset
L Keep the front cover page open for button
locations.
Make sure the handset is idle.
1 Press {v} or {e} repeatedly to display the
desired item.
2 Press {>}.
3 Scroll to “Save directory” by pressing
{v} or {e} repeatedly, and press {>}.
4 Press {OFF}.
3.12.2 Into the base unit
L Keep the front cover page open for button
locations.
1 Press {CALLER ID}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {MENU}.
4 Press {SET}.
5 Press {SET} again.
Note:
L You can confirm the stored items in the
telephone number list (page 82).
L The unit can only store a name of up to 10
characters long.
L To edit a name and number, see page 35.
FPG376.book Page 39 Wednesday, July 30, 2003 6:28 PM