Paradyne 3160-A3 Network Card User Manual


 
4. Maintenance
3160-A2-GB21-90 February 2001
4-35
5. From the Abort screen, press the Function key that corresponds to the
network or port for which you want to abort a test pattern. Use the scroll keys,
if necessary.
The DSU/CSU terminates the selected test pattern and displays the message
Command Complete
.
Lamp Test
Use the Lamp Test commands to start and stop a test of the DSU/CSU front panel
LCD and LEDs.
Starting a Lamp Test
Procedure
To start a Lamp test:
1. From the top-level menu screen, select Test.
2. From the Test screen, press the key until the Lamp selection appears on
the screen.
3. From the Test screen, select Lamp.
4. From the Lamp Test screen, select Start.
F1
F2
F3
Abort:
Send or Mon
NET Prt1 Prt2
F1
F2
F3
Test:
Lpbk Ptrns Lamp
F1
F2 F3
Lamp Test:
Abort Start