Paradyne 3160-A3 Network Card User Manual


 
C. Configuration Options
C-8
February 2001 3160-A2-GB21-90
Network Interface Configuration Options
Table C-3. Network Interface Configuration Options (1 of 3)
NET Framing: ESF (Factory 1) D4 (Factory 2)
Next D4 ESF Prev
Network Line Framing Format. The framing format to be used on the network interface.
D4
Configures for the D4 framing format.
ESF
Configures for the Extended Superframe format.
NET Coding: B8ZS (Factory 1) AMI (Factory 2)
Next AMI B8ZS Prev
Network Line Coding Format. The line coding format to be used on the network interface.
AMI
Configures for the Alternate Mark Inversion coding format.
B8ZS
Configures for the Bipolar 8 Zero Suppression coding format.
LBO: 0.0
Next 0.0 7.5 15 22.5 Prev
Line Build Out. The line build out (LBO) for the signal transmitted to the network (0.0 dB is
the factory default).
ANSI PRM: Disab
Next Enab Disab Prev
Generate ANSI Performance Report Messages. Specifies whether ANSI T1.403
compliant performance report messages (PRMs) are generated.
Enab
Generates and sends ANSI PRMs over the FDL every second.
Disab
Prevents the DSU/CSU from generating ANSI PRMs.
NOTE: This configuration option is only available if the framing format is set to ESF.
Mgmt Link: Disab
Next Enab Disab Prev
FDL Management Link. Specifies whether Facility Data Link (FDL) is enabled. Selecting
Enab allows SNMP or Telnet traffic to flow over the 4 kbps data link provided by FDL.
Running SNMP or Telnet over FDL requires an end-to-end FDL connection and cannot be
terminated within the network.
Enab
Enables the FDL management link for SNMP or Telnet.
Disab
Disables the FDL management link.
NOTES:
This configuration option is only available if the framing format is set to ESF.
This configuration option is not available if EDL is enabled.
If the local DSU/CSUs FDL is enabled, the remote DSU/CSUs FDL must also be
enabled.