Filter
Top Products
3. Operation
3160-A2-GB21-90 February 2001
3-49
5. Select User.
6. Press F1 (Next) until the Password configuration option appears.
7. Select port(s) to receive access security (None, Com, Modem, or Both). Use
the scroll keys, if necessary.
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on a Port
on page 3-48) the password itself is set.
Unless you specify otherwise, the password is null.
Procedure
To set a password:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the key until the Passwd selection appears
on the screen.
4. Select Passwd.
F1
F2 F3
Edit:
Chan Gen User
F1
F2 F3
Password:None
Next None Com
F1
F2
F3
Control:
Reset CID Passwd