Paradyne 3160-A3 Network Card User Manual


 
H. Asynchronous Terminal Operation
H-10
February 2001 3160-A2-GB21-90
2. From the Load Configuration From screen, select a configuration option set to
load (
Current
,
Customer 1
,
Customer 2
,
Default Factory 1
, or
Default
Factory 2
). You cannot edit the Default Factory configuration options, but you
can display them.
After selecting the set of configuration options to load, the Configuration
Edit/Display screen appears (Figure H-6, Configuration Edit/Display Screen).
Figure H-6. Configuration Edit/Display Screen
3. Select a functional group to display or edit.
NOTE:
Screen displays may vary depending on the model and configuration of the
DSU/CSU. For example, DTE and Copy Ports are not displayed for the
single-port DSU/CSU.
main/config/edit
Customer ID: Node A Model: 31xx
Slot: xx
CONFIGURATION EDIT/DISPLAY
Network
DTE
Sync Data Ports
Copy Ports
Cross Connect
General Options
User Interface
Alarms & Traps
Management and Communication
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save