Paradyne 3160-A3 Network Card User Manual


 
3. Operation
3160-A2-GB21-90 February 2001
3-39
Procedure
To select the data port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the Chan selection appears on
the screen.
5. Select Chan.
6. From the Channel Config screen, press the key to scroll the ports onto the
screen.
7. Select the desired port by pressing its corresponding Function key.
8. The configuration option for the data port channel allocation destination
appears on the screen. Select NET to assign this port to the network interface,
select DTE to assign this port to the DTE Drop/Insert (DSX-1) interface, or
press the key and the appropriate Function key to assign this port to
another port.
9. Press F1 (Next) to display the appropriate configuration options on the screen.
Use one of the following examples, depending on whether you are assigning
by block, ACAMI, or individual channel.
F1
F2 F3
Edit:DTE
Port NET Chan
F1
F2 F3
Channel Config:
Prt1 Prt2 Prt3
F1
F2
F3
Assign To:NET
Next NET DTE