Paradyne 3160-A3 Network Card User Manual


 
4. Maintenance
4-36
February 2001 3160-A2-GB21-90
5. The following screens alternately appear on the LCD until you press a
Function key to return to the Lamp Test screen. In addition, all LEDs blink.
6. When you are satisfied that all LEDs are lighting and the LCD is functioning
properly, abort the Lamp test from the Lamp Test screen. If there is no activity
on the DSU/CSU front panel for five minutes, the Device Health and Status
screen appears automatically. However, the Lamp test remains active until it is
aborted.
Aborting a Lamp Test
Procedure
To abort the Lamp test:
1. Display the Lamp Test screen. To do this when the LCD is alternating the
Lamp test screens, press any Function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.
2. From the Lamp Test screen, select Abort.
F1
F2
F3
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
F1
F2 F3
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F1
F2 F3
Lamp Test:
Abort Start
F1
F2 F3
Lamp Test:
Abort Start