Filter
Top Products
3. Operation
3-56
February 2001 3160-A2-GB21-90
4. From the Call Setup screen, select ChDir.
The Directory 1 displays first, along with its phone number if one has been
entered.
5. Press F1 (Next) to display the next directory (2, in this case). Press F2
(Previous) to display the previous directory (A, in this case). Directories
appear in order, 1 through 5 and then A.
6. Press F3 (Edit) to change the displayed directory’s phone number (phone
numbers can be up to 40 characters). If you select Edit, the Edit screen
appears.
7. Use the and keys to position the cursor under the digit(s) you want to
change. Press F1 to scroll up to a higher digit. Press F2 to scroll down to a
lower digit. The key inserts blanks (default characters) while the key
invokes the End Of Number (EON) character which terminates the dial string
and erases any characters to the right when you use the Save function.
See Table 3-6, Valid Phone Number Characters, for the set of valid characters
and rules that apply to entering phone numbers.
Example: P9W8135551212
8. Press F3 (Save) to store your changes in nonvolatile memory. If you press
or before saving the phone number you just changed, the previous
phone number remains in effect.
F1
F2 F3
Call Setup:
Pass Dial ChDir
F1
F2
F3
1: xxxxxxxxxxxxxxxxx
Next Prev Edit
F1
F2 F3
1: xxxxxxxxxxxxxxxxx
Next Prev Edit
F1
F2
F3
1: xxxxxxxxxxxxxxxxx
Up Down Save