Filter
Top Products
Configuring the 802.11b/g and IP Settings 2-13
Channel
This option selects the channel on which your network devices
communicate. All devices must be on the same channel to
communicate. Other radio devices such as Bluetooth wireless
devices, microwave ovens, or 2.4-gigahertz cordless phones may
operate on the same channel as your network. Channels 1-11 are
available. Use the channel for Ad-Hoc mode. In infrastructure mode,
the channel is negotiated with the access point and this setting is
ignored.
Note: Make sure all network devices are set to the same channel.
From the Main Menu: Select Setup, Network, Wireless. Then follow
these steps.
1. Press or until you see
WIRELESS
Channel
2. Press Enter/Pause. The current setting is displayed, for example:
Channel
[1/11] +5
3. Press or to change the setting. After you display the option
you need, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
Note: If you have problems connecting to your network, change the
channel to at least three channels lower or higher than any
other wireless networks within range.