Filter
Top Products
3-22 MonarchNet2 Operating Instructions
3. Click Submit. The MPCL format is sent or results from a Telnet
console command appear.
Changing the Password
You can change the access password for MonarchNet2. This should
only be done by your System Administrator. The default is access.
The password is case-sensitive and saved in the printer’s flash
memory.
Note: Make a note of the password if you change it. Changing the
password also restricts access to Telnet sessions.
1. From the side Menu Bar, click Access Control.
2. Enter the Current Password.
3. Enter the New Password.