Filter
Top Products
4-2 MonarchNet2 Operating Instructions
Conventions
This section uses the following conventions:
KEYwords
Type the capitalized letters of each keyword instead of
the whole keyword. Some keywords require more
capitalized letters than others. For example,
SEt
KEYVAL
RAdio
[options
]
Mutually-exclusive options are included within square
brackets and separated by a forward slash. Select only
ONE of the options. For example,
[DISable/STRICT/FLEXible]
<values>
Values are included within brackets. Values that
contain spaces (multiple words) must be enclosed
within quotation marks (""). For example,
SEt EN PW <value>
SEt EN PW "Store 876"
n
Numeric digits are indicated by the letter (n). For
example,
SEt IP BOot n
SEt IP BOot 5
SEt EN CHannel nn
SEt EN CHannel 11
Accessing Telnet Console Mode
1. Start a Telnet session.
2. Type telnet 192.0.0.192 (your printer’s IP address) and
press Enter.
3. You see “Welcome to MonarchNet2 Enter Password:”
Type access as the password and press Enter. (access is the
default password.)
The password is case-sensitive. Depending on your printer’s
firmware version, you may not be prompted for a username.
Note: The Telnet session times out after 10 minutes of inactivity.