Filter
Top Products
6-4 MonarchNet2 Operating Instructions
General Troubleshooting Information
Use the following information if your print server is not operating
properly.
1. Verify that the printer is turned on.
If the printer is used on a Monarch Mobile Work Station (MWS),
the MWS unit’s power AND the printer must be turned on. The
print server does not function when the printer is turned off.
2. Verify the print server is functioning.
When the printer is turned on, the print server runs through a set
of power-up diagnostics for a few seconds. All three LEDs blink
momentarily. Then, the LEDs indicate the following activity:
LED Indicators Status
solid printer is on
blinking error
Orange
off printer is off
solid Ethernet link (wired 10baseT)
blinking network activity
Yellow
off no Ethernet connection
solid Ethernet link (wired 100baseTX)
blinking network activity
Green
off no Ethernet connection
solid wireless link
blinking network activity
Yellow & Green
off no wireless connection
3. Print a configuration label (see Chapter 1).
Press the test button on the print server for about a second and a
label prints.