Filter
Top Products
Console Commands 4-17
SET EN INAP [PAP/MSCHAP_V2]
Sets the EAP inner authentication protocol.
SET EN IROAM [DISable/STRICT/FLEXible]
Controls whether the radio frequencies are set based on the radio
configuration or from its access point. Disabled uses the radio defaults.
Flexible uses access point settings if present, otherwise the radio defaults
are used. Strict uses access point regulatory frequency information.
SET EN PW <password>
Sets the password for 802.11b/g EAP authentication.
SET EN KEY# <1/2/3/4>
Sets which WEP key number to use (default is 1).
SET EN KEYVAL <WEPkey>
Sets WEP key value. Must be hexadecimal.
SET EN MODE [IN/AD]
Sets 802.11b/g wireless mode to infrastructure or Ad-Hoc mode.
SET EN RAdio [802.11b/802.11b-g]
Sets the radio type.
SET EN REALM <realm>
Sets the realm portion of the 802.11b/g EAP authentication ID.