Filter
Top Products
3-14 MonarchNet2 Operating Instructions
Changing Wireless Settings
Only configure the settings required for your network/printer.
1. Click the Wireless tab to configure the wireless network
(802.11b/g) settings.
2. Set the Mode: Ad-Hoc or infrastructure. In Ad-Hoc mode, you do
not need an access point. Infrastructure mode requires an access
point to communicate.
3. Set the SSID. The SSID is a unique identifier that must match for
all nodes on a subnetwork to communicate with each other.
4. Select the Radio type: 802.11b or 802.11b/g.
5. Set the Ad-Hoc channel: 1 to 11. All devices must be on the
same channel to communicate.
6. Set the Speed: 1, 2, 5.5, 11, 12, 18, 24, 36, 48, or 54 (megabits
per second).
7. Set the International Roaming: Disable, Strict, or Flexible.