Filter
Top Products
T12. alignment Options:
L
Align on left side of field.
C
Center text within field (monospaced fonts only)
R
Align on right side of field (monospaced fonts only)
B
Align at midpoint of field
E
Align at endpoint of the field
Use
L
,
B
, or
E
for any font.
T13. char rot Character rotation. The field or supply does not rotate, only
the characters do. Options:
0
Top of character points to top of field
1
Top of character points to left of field
2
Top of character points to bottom of field
3
Top of character points to right of field
T14. field rot Field rotation. Field rotation rotates the whole field, not just
the characters. Rotation is affected by the pivot point, which
varies depending on how text is justified. Lower left corner of
field is the pivot point. Options:
0
Top of field points to top of supply
1
Top of field points to left of supply
2
Top of field points to bottom of supply
3
Top of field points to right of supply
T15. sym set Symbol set. Use
1
(ASCII Symbol Set)
See Appendix C, "Symbol Sets/ Code Pages" for more information.
Example:
T,2,10,V,250,50,0,1,1,1,B,C,0,0,0 p
Defines a text field (field #2) with a variable length of up to 10
characters. The field begins at row 250, column 50. There is no
additional gap between characters, and the Standard font is used
without any additional magnification. The printing is black on
white and centered. No field or character rotation is used. The
internal symbol set is used.
3-6
Defining Fields