Filter
Top Products
Machine Faults
Errors 700 to 799 occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
If the error continues to appear, change the supply.
730 A memory allocation error occured during initialization.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected. The
supply may be jammed.
For errors 751-753, Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
If the error continues to appear, change the supply.
752 Printer sensed a mark in the wrong place.
753 Printer sensed a mark that is too long.
7-14
Troubleshooting