Filter
Top Products
C7. wid mag Width magnifier,
1-7
(times) Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field.
C8. color Options for standard printer fonts:
B
Opaque, Normal, Black, Normal
D
Opaque, Normal, White, Normal
O
Transparent, Normal, Black, Normal
R
Transparent, Normal, White, Normal
W
Opaque, Normal, White, Normal
NOTE:
Solid black print should not exceed 30% on a given
square inch of the label, or the printhead life may be
decreased.
There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does
not block out (or "erase") existing fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Field placement in the packet is an important consideration
when using field color attributes. If a line field is defined
before the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field’s color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field’s color attribute.
C9. alignment Alignment of constant text in the field. Options:
L
Align on left side of field.
C
Center text within field (for monospaced fonts only)
R
Align on right side of field (for monospaced fonts only)
B
Align at midpoint of field
E
Align at end of field.
Use
L
,
B
, or
E
for any font.
C10. char rot Character rotation. Options:
0
Top of character points to top of field
1
Top of character points to left of field
2
Top of character points to bottom of field
3
Top of character points to right of field
3-14
Defining Fields