Filter
Top Products
28 Section 4: Ribbon and Print Media
Digital Label Press 3 User’s Manual
12. Guide the paper over the Platen and under the Pinch Roller as shown. Make
certain the paper is centered on the platen roller.
13. Remove any slack in the paper path by pulling on the leading edge of the
paper. Continue to feed the paper through the press until the leading edge can
be seen coming out the left side of the press. (Hint: Remove the Output Tray to
better see the paper path.
Impressa3.qxd 10/22/01 9:29 PM Page 28