Filter
Top Products
Section 5: Connecting the Press 35
Digital Label Press 3 User’s Manual
B. CONNECTING THE USB-TO-PARALLEL INTERFACE CABLE
This press is designed to be used with nearly any high-end IBM-PC or compatible
running Windows 98, ME, and 2000. For best performance, a minimum of a
Pentium III/IV with 128 megabytes of RAM or higher and a hard disk with at least
2 gigabytes of free space is recommended. Note that processing speed will increase
if additional RAM is added.
The printer is equipped with a USB to parallel adapter cable. This cable provides
the extremely high data transfer speeds required to send files to your press.
1. Connect the USB cable to your USB port. The other end of the cable should not
be connected to the printer.
2. Your computer will automatically detect the cable as a plug and play device.
You may be prompted to find a driver for the cable. If so, simply place the
driver disc for the cable in your CD-R drive and click Next.
Impressa3.qxd 10/22/01 9:29 PM Page 35