Filter
Top Products
70 Section 8: Maintenance
Digital Label Press 3 User’s Manual
2. Locate the black, plastic Cutter Arm which holds the aluminum Blade Holder
in place.
3. Loosen the gold-colored Securing Knob by turning it toward the rear of the
printer.
4. Remove the aluminum Blade Holder.
The cutter blade is razor-sharp and can easily cut you. Be extrememly careful when
removing this blade!
Cutter Arm
Blade Holder
CAUTION!
!
Impressa3.qxd 10/22/01 9:30 PM Page 70