Filter
Top Products
Chapter 5 Major Cleaning
196
24. Wipe the SELFOC lens by moving a Toraysee cloth from the
inner part of the printer toward you. Wipe the lens in this
manner several times until there is no more dirt on the cloth.
NOTE: Always wipe the SELFOC lens with the unused side of the
Toraysee.
Legend:
1) SELFOC Lens
2) Drum Surface Potential Sensor
25. Install the main charger.
26. Install the photoreceptor drum. (See page 130.)
27. Install the developing unit. (See page 147.)
28. Install the cleaning unit.
2
1