Filter
Top Products
Chapter 6 System Status And Error Messages
214
• If the fault is not cleared:
a. The printer beeps and briefly displays the following
message:
b. The printer then redisplays the original fault message, or
any other uncleared fault message.
c. Attempt to clear the fault condition again, or contact your
service representative.
• If the fault is cleared, and if you do not need to reload the paper
into the tractors (for example, the printer ran out of toner):
a. The printer goes OFFLINE.
b. Press ONLINE to resume printing.
• If the fault is cleared, and if you need to reload paper into the
tractors (such as after a paper jam), the following message
appears:
a. Reload the paper onto the tractors.
b. Press CLEAR.
c. Press ONLINE to resume printing.
Note that pages have
been lost.
• If the fault is cleared, and if you already have reloaded the
paper while clearing the fault condition (in Step 2), the following
message appears:
Faults Not Cleared
Reload Paper
in Tractors
Standby ...
Clearing Fault