Filter
Top Products
Appendix C Overview
254
RS-422 Serial Interface Connector Pin Assignments
The printer provides a 25-pin DB-25S connector inside the lower
cabinet for connection of a serial interface cable. This connector is
also used for the RS-232 serial interface. Selection of the desired
interface is determined by the position of the RS232/422 switch
located inside the lower cabinet of the printer.
The following table lists the pin assignments of the RS-422
interface connector.
Pin Signal Direction
1 Chassis Ground Not applicable
2
14
Transmit Data A (TxDA)
Transmit Data B (TxDB)
From printer
From printer
3
16
Receive Data A (RxDA)
Receive Data B (RxDB)
To printer
To printer
4
19
Request To Send A (RTSA)
Request To Send B (RTSB)
From printer
From printer
5
13
Clear To Send A (CTSA)
Clear To Send B (CTSB)
To printer
To printer
6
22
Data Set Ready (DSR) / Clock A
Clock B
To printer
To printer
7 Signal Ground Not applicable
20
23
Data Terminal Ready A (DTRA)
Data Terminal Ready B (DTRB)
From printer
From printer