Filter
Top Products
Loading Cut Sheet Paper (Option)
37
The following table lists the available standard settings for the cut
sheet paper feed cassette (0 = plastic insert; — = no insert):
Cut Sheet Tray Linking
If your printer is equipped with the cut sheet paper feed option, you
can use Tray Linking. Tray Linking is disabled by default. With Tray
Linking enabled, when the active cut sheet paper tray runs out of
paper, the printer will automatically switch to the other paper tray
and continue printing.
To enable or disable this feature, see the Tray Linking option on the
Paper Control menu, page 69.
NOTE: Disable Tray Linking if the two cut sheet paper trays are of
different sizes
If the cut sheet trays are of different sizes, and Tray Linking
is enabled, the printer will not switch to the alternate tray
when the first tray runs out of paper, nor will it display the
usual “CUT-SHEET PAPER EMPTY” message on the
LCD. Instead, the printer stops printing and displays the
message “TRAY MISMATCH.”
Paper Size IPS 12/22 IPS 11/21 IPS 10/20
Legal — 0 0
Ledger 0 0 —
A3 0 — 0
B4 0 — —
Letter — 0 —
A4 — — 0
Custom Size
(variable width 7.0 in
- 12.0 in, variable
length 8.3 in - 19.6 in)
00 0