Filter
Top Products
106
Chapter 3 IGP/PGL Emulation
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
• Disable. The printer ignores all carriage returns that are not followed by
line feeds.
•Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.
Select Font
Select Font specifies which language is currently selected for use with the
PGL. Refer to page 111 for available selections.
Slash 0
This parameter allows you to print the numeral “0” with or without the slash.
This option applies to all character sets except OCR A and OCR B.
• Disable. Zero is printed without a slash.
•Enable. Zero is printed with a slash.
Autoeject
If the last page of a job is not full, that is, the data does not fill the entire page,
you can instruct the printer to eject the page or to stop and hold the page at
the last print position.
•Enable. The printer ejects the last page after the entire job has been
processed and printed.
• Disable. The default. The printer does not eject the last page unless you
send a Page Eject command or until the printer receives another print job.
Select LPI
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6 inch from the top of one print line to the top of the next print line.
Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
• Disable. The printer will print text in upper and lowercase.
•Enable. The printer will print text in uppercase only.