Filter
Top Products
204
Appendix A
Lists Of Approved Media
For a current list of approved standard media for use in Printronix thermal and
thermal transfer label printers, please call Printronix at (800) 733-1900 or FAX
(714) 368-2354. Further information can be obtained by calling the Printronix
Thermaline Help Desk at (714) 368-2488 or from the Printronix Web Page at
http://www.printronix.com.
Indicators And Switches
Indicator Lights: ONLINE
Switches: POWER
Keys: PAUSE, FEED, CANCEL, TEST, CLEAR, PRT
CONFIG, JOB SELECT, ENTER, UP, DOWN,
PREV, NEXT
Message Display: 2-row 16-characters per row for error messages,
print status, and recalling stored formats
Host Interfacing
1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200 baud.
2. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
3. Coax/Twinax (optional).
4. Ethernet 10 Base - T (optional)
The RS-232 and RS-422 host interfaces shall have the following
characteristics:
Character Set:
ANSI
®
ASCII character set
Word Length: Selectable 7-bit or 8-bit data format
Handshaking: XON/XOFF (in receive mode only) and RTS/DTR
Input Buffer: Selectable from 1k through 16 kbytes.
Electrical:
Power Source: 115 or 230 VAC 50/60Hz switching power supply.
Circuit Protection One T6.3-amp, 250V Time-Lag fuse.
Grounding: Unit must be connected to a properly grounded
receptacle.