Filter
Top Products
Advanced Validator Options
65
The following is a sample scan report of a Code 39, 10 mil bar code
containing "*RJS8702*" with a quiet zone violation:
Scan Profile
This is an executable menu that prints the scan reflectance profile
of a bar code placed in the validator scan beam.
NOTE: You will need a minimum installed label width of 2 inches
to support the Scan Profile printout.
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press ↓ and
↵ at the same time to unlock the
↵ key.
3. If necessary, press until VALIDATOR displays.
4. Press ↑ until Scan Profile displays.
5. Place a bar code in the scan beam path.
6. Press
↵ to scan the bar code.
7. When prompted on the control panel, remove the scanned bar
code.
8. Press
↵ to print the scan profile.
.
.
.
.
.
.