Filter
Top Products
Error Action
79
For more information on choosing a value for the Number of Codes
parameter, see “Setting Number Of Bar Codes On A Form” on
page 50.
Error Action
The printer response is the same whether the error stems from a
bad or missing bar code. It is determined by the Validator Action
setting in the VALIDATOR menu:
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press ↓ and
↵ at the same time to unlock the
↵ key.
3. If necessary, press until VALIDATOR displays.
4. Press ↓ until Validator Action displays.
5. Press + or – to scroll through the choices:
• Retry Form (default)
• Stop & Retry
• Grade&Report
• Rescan Form
• Rescan&Retry
• Rescan&Stop
• Stop
• Overstrike
These options are described in detail below.
6. Press
↵ to select the desired value.
7. Press ↓ and
↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
.
.
.
.
.
.