Filter
Top Products
VTrak M310p, M210p Product Manual
132
W, continued
Write Check Table, logical drive – Main Menu, Logical Drive Management,
individual logical drive, Check Table
This is the end of the CLU Function Map
Quick Setup
Quick Setup is discussed under “VTrak Setup with CLI or CLU” on page 17.
Subsystem Management
Subsystem Management includes, Alias, Media Patrol, Lock Management,
System Date and Time, Controller Management and Enclosure Management.
Alias
An alias is optional. To set an Alias for this subsystem:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Type and alias into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between words
and underscore.
3. Press Ctrl-A to save your settings.
Media Patrol
Media Patrol is a routine maintenance procedure that checks the magnetic media
on each disk drive. Media Patrol checks all physical drives assigned to disk
arrays and spare drives. It does not check unconfigured drives.
To start, stop, pause or resume Media Patrol:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Media Patrol and press enter.
3. Highlight Start, Stop, Pause, or Resume and press Enter.
4. If you chose Stop, press Y to confirm.
Lock Management
This function displays lock status and enables you to lock or unlock a subsystem
controller. The lock prevents other sessions (including by the same user) from
making a configuration change to the controller until the lock expires or a forced
unlock is done. When the user who locked the controller logs out, the lock is
automatically released.