Filter
Top Products
VTrak M310p, M210p Product Manual
200
Transition
The Transition feature enables you to specify “permanent” spare drives for your
VTrak subsystem. Transition is the process of replacing a revertible spare drive
that is currently part of a disk array with an unconfigured physical drive or a non-
revertible spare. The revertible spare drive returns to its original status.
Transition happens automatically when the following sequence of events takes
place:
• You create a revertible spare drive.
See page 113 (WebPAM PROe) or page 155 (CLU).
• A physical drive assigned to your disk array fails and the array goes critical
or degraded.
• VTrak automatically rebuilds your array to the revertible spare drive and the
array becomes functional again.
• You replace the failed physical drive with a new physical drive of equal or
greater capacity.
• VTrak automatically transitions (moves) the data from the revertible spare to
the new physical drive.
• The new physical drive becomes part of the array and the revertible spare
drive returns to its original spare status.
Transition happens manually when you specify a different unconfigured physical
drive to transition (move) the data from the revertible spare drive.
See the example below.
Example
Following is an example to explain the Transition function.