Filter
Top Products
Chapter 4: Management with WebPAM PROe
67
5. Enter Session Time Out interval.
24 minutes is the default.
6. If you want to use a secure connection, check the Enable SSL box.
7. If you checked the Enable SSL box, enter a HTTPS Port number.
443 is the default.
8. If you want to download a SSL Certificate, check the Download Certificate
box.
9. If you checked the Download Certificate box, enter the Certificate filename
or click on the Browse... button to locate it.
10. When you are done, click on the Submit button.
11. Click OK in the confirmation box to restart the Web Server service with your
changes.
Change Start Setting
To change the Web Server Automatic/Manual start setting:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Web Server Setting link.
4. Under Startup Type:
• Click on the Automatic option to start the service automatically during
system startup.
• Click on the Manual option to start the service manually (the service
does not start during system startup).
5. Click on the Submit button.
Manual Start, Restart, Stop
To manually start, restart or stop the Web Server service:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click on the Web Server Setting link.
4. Under Running Status:
• If the service is stopped, click the Start button to start the service.
• If the service is started, click the Stop button to stop the service.
Or click on the Restart button to restart the service.
Telnet
VTrak’s Telnet service enables you to access VTrak’s Command Line Interface
(CLI) through a network connection.