Filter
Top Products
VTrak M310p, M210p Product Manual
72
1. Click on the Subsystem icon in Tree view.
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Under Running Status:
• If the service is stopped, click the Start button to start the service.
• If the service is started, click the Stop button to stop the service. Or click
on the Restart button to restart the service.
Change Start Setting
To change the Netsend Automatic/Manual start setting:
1. Click on the Subsystem icon in Tree view.
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Under Startup Type:
• Click on the Automatic option to start the service automatically during
system startup.
• Click on the Manual option to start the service manually (the service
does not start during system startup).
5. Click on the Submit button.
Add Recipients
To add recipients of Netsend messages:
1. Click on the Subsystem icon in Tree view.
2. Click on the Administration Tools icon.
3. Click on the Netsend link.
4. Enter the recipient PC’s IP address in the Recipient IP Address field.
5. Under Recipient filter, select the lowest level of Severity to be reported for
each event.
The selected level plus all higher levels of Severity will be reported:
• Information – Information only, no action is required
• Warning – User can decide whether or not action is required
• Minor – Action is needed but the condition is not a serious at this time
• Major – Action is needed now
• Critical – Action is needed now and the implications of the condition are
serious
• Fatal – Non-Recoverable error or failure has occurred
6. Click the Update button to add the new recipient to the list