Preliminary
SANbox-16HA Fibre Channel Switch Specifications
SANbox-16HA Fibre Channel Switch
Installer’s/User’s Manual 59005-03 Rev. A Reference Information A-5
Switch Mechanical
Chassis Dimensions:.......................... Refer to Figure A-1 and Figure A-2.
Enclosure Types: ................................The chassis is shipped with four rubber feet
on the bottom for secure stacking. Cabinet
Mounting Brackets are also shipped with the
chassis. You may mount these brackets on the
front or back of the chassis for mounting in a
Standard 19-inch EIA rack with either the
chassis back or front facing the front of the
equipment rack.
Chassis Support: ................................The chassis MUST be supported by a shelf
or rails when rack-mounted
Chassis Weight:..................................32 lbs maximum configuration
Switch Electrical
Power source loading: ........................1.7 Amps maximum at 90 to 137 Vac
0.9 Amps maximum at 180 to 265 Vac
Each Power Supply: ...........................140 Watts
Operating voltage:..............................90 to 137 Vac; 47 to 63 Hz
180 to 265 Vac; 47 to 63 Hz
Input Fuse Type: .................................There is one input fuse. The
fuse is a 4 Amp Slow-Blow, 250V
Littelfuse P/N 218004 or equivalent
Switch Environmental
Operational Temperature:...................5 to 40°C
Operating Humidity:..........................15 to 80%, non-condensing
Operating Altitude:.............................0 to 3048m (0 to 10,000 feet)
Operating Vibration: ..........................During/after (in any axis) of magnitude:
5-500 Hz, random,
0.21 G rms, 10 minutes
Operating Shock: ...............................During/after (in any axis) of magnitude:
4g, 11 ms, 20 repetitions
Air flow:.............................................Cooling air flows from the front to the back.
Heat output:........................................600 BTU/hr fully populated
Non-Operational Temperature: ..........-40 to +70°C
Non-Operating Humidity:..................5 to 90%, non-condensing