Filter
Top Products
Preliminary
GBIC
SANbox-16HA Fibre Channel Switch
4-4 Removal/Replacement Procedures 59005-03 Rev. A Installer’s/User’s Manual
To remove GBICs that have bail-operated latches, as shown in Figure 4-4,
use your finger-tip to rotate the bail outward, then pull on the bail to remove
the GBIC.
Figure 4-4 Removing GBICs that have bail-operated latches
Replacement
GBICs may be removed and replaced with the Switch power on without disrupting
traffic on other ports.
1. Orient the GBIC as shown in Figure 4-5. The Keyway is ON THE BOTTOM
(as shown) for the top row of ports and ON THE TOP for the bottom row of
ports.
Figure 4-5 Replacing GBICs
Latch
Keyway
Bail
Connector
GBIC
Connector
Port
Connector
Keyway
Latch