SANbox 1400 Series Switch Management
User’s Guide
Index-6 59226-00 B
S
Set Log command A-51
Set Port command A-55
Set Setup command A-57
severity levels 3-12
SFP level test 5-17
shortcut key 2-22
Show command A-62
Show Config command A-77
Show Log command A-81
Show Perf command A-85
Show Setup command A-87
Shutdown command A-90
Simple Network Management Protocol
configuration 4-29, A-57
configuration display A-87
enabled 4-29
proxy 4-29
reset A-31
trap configuration 4-30
soft zone 3-21, 3-37
static boot method 4-26
status icon color 2-24
steering A-67
subnet mask address 4-26
support file 4-35
switch
add 3-7
administrative state 4-19, A-38
advanced properties 4-22
configuration 4-17, A-43
configuration display A-77
delete 3-7
displaying information 4-7
hard reset 4-16, A-19
hot reset 4-16
icons 3-10
location 4-29
manufacturer information A-87
operational information A-68
paging 4-14
properties 4-18
replace 3-8
reset 4-15, A-94
reset without POST 4-16, A-32
restore factory defaults 4-34
selecting 2-27
status 2-27
Switch data window 4-8
symbolic name
port 5-14
switch 4-18
syslog 4-27
system configuration
change A-58
display A-87
System Fault LED 4-37
T
Test command A-91
testing ports 5-16
time 4-15, A-16
time zone 4-15, A-39, A-69
timeout values 4-23
tool bar
standard 2-23
zoning 3-26