Q-Logic 59226-00 B Switch User Manual


 
4 – Managing Switches
Displaying Switch Information
4-8 59226-00 B
S
4.2.1
Devices Data Window
The Devices data window displays information about devices (hosts and storage
targets) connected to the switch. Click the Devices tab below the data window to
display name server information for all devices that are logged into the selected
fabric. To narrow the display to devices that are logged into specific switches,
select one or more switches in the fabric tree or the topology display. Refer to
“Devices Data Window” on page 3-15 for a description of the entries in the
Devices data window.
4.2.2
Switch Data Window
The Switch data window displays current network and switch information for the
selected switches. Refer to “Configuring a Switch” on page 4-17 for more
information about the Switch data window. To open the Switch data window, select
one or more switches in the topology display, or open the faceplate display, and
click the Switch tab below the data window. Table 4-2 describes the Switch data
window entries.
Table 4-2. Switch Data Window Entries
Entry Description
Switch Type Switch model
First Port Address Switch Fibre Channel address
World Wide Name Switch World Wide Name
Serial Number Number assigned to each chassis.
Reason for Status Additional status information
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
User Authentication
Enabled
Enforcement of account names and authority (always
True)
Vendor Switch manufacturer
Firmware Version Active firmware version
Inactive Firmware Version This field does not apply to this switch
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Boot Version PROM boot version