Filter
Top Products
5 – Managing I/O Blades
Resetting an I/O Blade
5-10 59234-03 A
S
5.5
Resetting an I/O Blade
Resetting an I/O blade reinitializes the I/O blade using the saved configuration. To
reset an I/O blade, do the following:
1. Select one or more blades in the faceplate display.
2. Open the Blade menu and select Reset Blade or Hard Reset. Resetting the
blade will disrupt traffic.
3. Click the Yes button to reset the blade.
5.6
Displaying Hardware Status
The LEDs on the I/O blade and Maintenance Panel of the SANbox 9000 faceplate
and backplate provide hardware status information when you rest the cursor on
them.
NOTE: If the Test Status field in the Test Results area indicates Failed, note
the Test Fault Code displayed in the Blade Information data window
and contact Tech Support.