Filter
Top Products
3 – Managing Fabrics
Zoning
3-32 59234-03 A
S
3.7.6.5
Removing a Zone Member
Removing a zone member will affect every zone and zone set in which that zone
is a member. To remove a member from a zone:
1. In the Edit Zoning dialog, select the zone member to be removed.
2. Open the Edit menu and select Remove.
3. Click the Yes button in the Remove dialog to save the change.
4. Click the Apply button in the Edit Zoning dialog to save the change.
5. Click the Close button to close the Edit Zoning dialog.
3.7.6.6
Removing a Zone from a Zone Set
The orphan zone set is created by the web applet automatically to hold the zones
which are not in any set. The orphan zone set cannot be removed and is not
saved on the switch. To remove a zone from a zone set, do the following:
1. In the Edit Zoning dialog, select the zone to be removed. The selected zone
will be removed from that zone set only.
2. Open the Edit menu and select Remove.
3. Click the Yes button in the Remove dialog to save the change.
4. Click the Apply button in the Edit Zoning dialog to save the change.
5. Click the Close button to close the Edit Zoning dialog.
3.7.6.7
Removing a Zone from All Zone Sets
To remove a zone from all zone sets, do the following:
1. In the Edit Zoning dialog, select the zone to be removed.
2. Open the Edit menu and select Delete Zone.
3. Click the Yes button in the Remove dialog to save the change.
4. Click the Apply button in the Edit Zoning dialog to save the change.
5. Click the Close button to close the Edit Zoning dialog.
NOTE: Zones that are currently not in a zone set are considered to be part of
the “orphan zone set”. The orphan zone set is not an actual zone set,
but rather a way of displaying the zones that are not currently in a zone
set.