Filter
Top Products
3 – Managing Fabrics
Zoning
3-26 59234-03 A
S
3.7.4.6
Restoring the Default Zoning Database
Restoring the default zoning clears the switch of all zoning definitions.
To restore the default zoning for a switch:
1. Open the Zoning menu and select Restore Default Zoning.
2. Click the OK button to confirm that you want to restore default zoning and
save changes to the zoning database.
3.7.4.7
Removing All Zoning Definitions
To clear all zone and zone set definitions from the zoning database, choose one of
the following:
Open the Edit menu and select Clear Zoning. In the Removes All dialog,
click the Yes button to confirm that you want to delete all zones and zone
sets.
Right-click the Zone Sets heading at the top of the Zone Sets tree, and
select Clear Zoning from the popup menu. Click the Yes button to confirm
that you want to delete all zone sets and zones.
3.7.5
Managing Zone Sets
Zoning a fabric involves creating a zone set, creating zones as zone set members,
then adding devices as zone members. The zoning database supports multiple
zone sets to serve the different security and access needs of your storage area
network, but only one zone set can be active at one time.
Managing zone sets consists of the following tasks:
Creating a Zone Set
Activating and Deactivating a Zone Set
Copying a Zone to a Zone Set
Removing a Zone Set
CAUTION!
This command will deactivate the active zone set.
NOTE: Zones that are currently not in a zone set are considered to be part of
the “orphan zone set”. The orphan zone set is not an actual zone set,
but rather a way of displaying the zones that are not currently in a zone
set.