Q-Logic 9000 Switch User Manual


 
2 – Using QuickTools
QuickTools User Interface
59234-03 A 2-11
A
2.3.8
Selecting Blades
I/O blades and ports are selectable and serve as access points for other displays
and menus. You select I/O blades and ports to display information about them in
their respective data windows or to modify them. Context-sensitive popup menus
and properties windows are accessible through the I/O blade and port icons.
Refer to Section 5 Managing I/O Blades for detailed blade information.
You can select I/O blades in the following ways.
To select a blade, click the blade.
To select a range of consecutive blades, select a blade, then press the Shift
key and select another blade. The web applet selects both end blades and
those in between in sequence.
To select all blades, right-click anywhere in the graphic window. Select
Select All Blades from the popup menu.
To cancel a selection, press the Control key and select it again.
To select several non-consecutive blades, press the Control key while
clicking each blade.
To un-select blades in a group of selected blades, press the Control key
while clicking each blade.