Filter
Top Products
4 – Managing Switches
Configuring a Switch
4-16 59234-03 A
S
4.6.1
Using the Configuration Wizard
The Configuration Wizard is a series of dialogs you can use to configure the IP
address and other basic parameters on new or replacement switches. It is
important to configure switches in an isolated network environment prior to
insertion into the main fabric. Open the Wizards menu and select Configuration
Wizard. Use the Configuration Wizard to configure a new switch in a fabric.
4.6.2
Switch Properties
To open the Switch Properties dialog, choose one of the following:
Open the faceplate display for the switch you be configuring. Open the
Switch menu and select Switch Properties.
Right-click a switch graphic in the faceplate display, and select Switch
Properties from the popup menu.
Use the Switch Properties dialog to change the following switch configuration
parameters:
Domain ID and Domain ID Lock
Syslog
Symbolic Name
Switch Administrative States
Broadcast Support
In-band Management
Fabric Device Management Interface
Figure 4-7. Switch Properties Dialog