Filter
Top Products
4 – Managing Switches
Switch Data Window
59234-03 A 4-7
A
SSL Enabled Secure Sockets Layer status. If enabled, encryption for
QuickTools, QuickTools web applet, and CIM sessions is
provided.
CIM Enabled Common Information Model status. The CIM agent is
based on the SNIA Storage Management Initiative Speci-
fication (SMI-S), which is the standard for SAN manage-
ment in a heterogeneous environment.
FTP Enabled FTP status
Management Server
Enabled
Management server status.
SNMP Enabled SNMP enabled or disabled.
Call Home Enabled Call Home status. If enabled and configured, switches can
send alerts and events to pagers, Email and QLogic Tech-
nical support. Users can configure the type of events and
where the alerts are sent.
Zones/Security Group
Merge Auto Save Zoning auto save status. If enabled, any zoning updates
from the fabric will be saved in permanent (non-volatile)
memory as well as temporary memory. If disabled, any
zoning updates from the fabric will be saved only in tem-
porary memory and will be lost after a switch reset.
Default Zone Disables communication between ports and devices not
defined in the active zone set, or when there is no active
zone set.
Discard Inactive Automatically removes the previously active zone set
when a zone set is activated on a switch.
Default Zoning Visibility Permits (All) or prevents (None) communication with other
switches in the absence of an active zone set. This fea-
ture is only configurable with previous firmware versions.
Implicit Hard Zoning Introduces hardware enforcement of zoning regardless of
type. All zones and all supported zone member types will
have hardware enforcement.
Table 4-1. Switch Data Window Entries (Continued)
Entry Description