Q-Logic 9000 Switch User Manual


 
4 – Managing Switches
Switch Data Window
59234-03 A 4-5
A
Warning Temperature Non-configurable temperature threshold (65° Celsius)
above which a warning condition alarm is generated.
Failure Temperature Non-configurable temperature threshold (70° Celsius)
above which a failure condition alarm is generated.
Diag Status The current diagnostic state of switch.
Diag Fault Code The code value for the last recorded diagnostic test result
recorded on the switch.
Test Status The current diagnostic test status of switch.
Test Fault Code The code value for the last recorded diagnostic test status
recorded on the switch.
Network Group
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
CPU0 MAC Address Media Access Control address of CPU0
CPU1 MAC Address Media Access Control address of CPU1
SNMP Enabled SNMP enabled or disabled.
Broadcast Support Broadcast support status. Broadcast support is enabled
(default) or disabled.
NTP Client Enabled Enabled or disabled. Allows for switches to synchronize
their time to a centralized server.
NTP Server Address The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
Use Front Port Use this option to activate the two CPU Ethernet connec-
tions on the backplate, or activate the two Maintenance
Panel Ethernet connections on the faceplate.
User Login Group
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
Table 4-1. Switch Data Window Entries (Continued)
Entry Description