Q-Logic 9000 Switch User Manual


 
6 – Managing Ports
Configuring Ports
59234-03 A 6-11
A
Device Scan
Port Transceiver Media Status
The port settings or characteristics for 1/2/4-Gbps and 10-Gbps ports are
configured using the Port Properties dialog shown in Figure 6-4. To open the Port
Properties dialog, select one or more ports, open the Port menu and select Port
Properties.
Figure 6-4. Port Properties Dialog
The Port Properties dialog entries are listed below in Table 6-4.
NOTE: Ports are not configurable if the blade type is Auto in the Blade
Properties dialog.
NOTE: Use the Select to Propagate Changes to Entire Column options to
propagate the same change to all selected ports, select the options
before making a change to a port.
Table 6-4. Port Properties Dialog Entries
State Description
Port The current port name
Symbolic
Name
To change, click in the field and enter the new port symbolic name.
Opera-
tional State
The port state that is currently active. This value may be different from the
administrative port state, for example due to an error condition.