Filter
Top Products
Quatech SDS User’s Manual Installing the device drivers
Figure 31 - DHCP confirmation pop-up box
Figure 32 shows DHCP server
confirmation pop-up box. Only
answer Yes if you are sure that
the DHCP server will always
assign the same IP address to
the SDS.
Step Procedure Description
Step 40 Press Yes to have the DHCP server assign
the IP address only if you are sure it will
assign the same IP address each time.
Otherwise, press No.
If you answer Yes, the DHCP server will
assign the IP address for your SDS. If
this address changes, communication
with the SDS may fail. The SDS
Wizard Information DHCP screen
displays. Continue with □ Step 41.
If you answer No, you return to the
TCP/IP Network Configuration
Parameters screen. Go to
□ Step 16.
Figure 32 - SDS Wizard Information DHCP screen
Figure 33 informs you that the
Wizard going to search for the
SDS using the last known IP
parameters.
Step Procedure Description
Step 41 Press the Next button. The Search network for Serial Device
Servers screen displays.
Go to
□ Step 10.
July 2005 940-0183-153 Page 35